Уиндоуската машина не ми вижда компютъра.
#
# Sample configuration file for the Samba suite for Debian
GNU/Linux.
#
#
# This is the main Samba configuration file. You should read
the
# smb.conf(5) manual page in order to understand the options
listed
# here. Samba has a huge number of configurable options most
of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a
#
# for commentary and a ; for parts of the config file that
you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the
command
# "testparm" to check that you have not made any basic
syntactic
# errors.
#
#======================= Global Settings
=======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba
server will part of
workgroup = Mshome
# server string is the equivalent of the NT Description
field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable
its WINS Server
; wins support = no
# WINS Server - Tells the NMBD components of Samba to be a
WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client,
but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through
DNS.
dns proxy = no
# What naming service and in what order should we use to
resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP
address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you
must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your
Samba machine is
# not protected by a firewall or is a firewall itself.
However, this
# option cannot handle dynamic or non-broadcast interfaces
correctly.
; bind interfaces only = true
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each
machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 1000
# If you want Samba to only log through syslog then set the
following
# parameter to 'yes'.
; syslog only = no
# We want Samba to log a minimum amount of information to
syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If
you want to log
# through syslog you should set the following parameter to
something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a
backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require
a Unix account
# in this server for every user accessing the server. See
#
/usr/share/doc/samba-doc/htmldocs/Samba-HOWTO-Collection/ServerType.html
# in the samba-doc package for details.
security = share
# You may wish to use password encryption. See the section
on
# 'encrypt passwords' in the smb.conf(5) manpage before
enabling.
encrypt passwords = yes
# If you are using encrypted passwords, Samba will need to
know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
; guest account = nobody
invalid users = root
# This boolean parameter controls whether Samba attempts to
sync the Unix
# password with the SMB password when the encrypted SMB
password in the
# passdb is changed.
; unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux
system, the following
# parameters must be set (thanks to Ian Kahan
<<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in
Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
*Retype\snew\sUNIX\spassword:* %n\n
*password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for
password changes
# when requested by an SMB client instead of the program
listed in
# 'passwd program'. The default is 'no'.
; pam password change = no
########## Domains ###########
# Is this machine able to authenticate users. Both PDC and
BDC
# must have this setting enabled. If you are the BDC you
must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons'
is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on
the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's
home directory
; logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons'
is set
# It specifies the location of a user's home directory (from
the client
# point of view)
; logon drive = H:
; logon home = \\%N\%U
# The following setting only takes effect if 'domain logons'
is set
# It specifies the script to run during logon. The script
must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain
controller via the SAMR
# RPC pipe. The example command creates a user account with
a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet
--disabled-password --gecos "" %u
########## Printing ##########
# If you want to automatically load your printer list
rather
# than setting them up individually then you'll need this
; load printers = yes
# lpr(ng) printing. You may wish to override the location of
the
# printcap file
; printing = bsd
; printcap name = /etc/printcap
# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups
# When using [print$], root is implicitly a 'printer admin',
but you can
# also give this right to other users to add drivers and set
printer
# properties
; printer admin = @lpadmin
############ Misc ############
# Using the following line enables you to customise your
configuration
# on a per machine basis. The %m gets replaced with the
netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better
performance.
# See smb.conf(5) and
/usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY
restrict anonymous = no
domain master = no
preferred master = no
max protocol = NT
acl compatibility = winnt
ldap ssl = No
server signing = Auto
[VIDEOS]
path = /home/lawlessbg/Videos
guest ok = yes
|
