Изпечатай

[Nerf]

Здравите,
преди няколко дни си взех лаптоп Asus A9T-5002. Имам проблем с подкарването на PCMCIA слота и вградения четец за карти(MMC/SD/MS което е по-малкото зло).
Там е работата, че въобще не ми ги хваща ядрото. Ето го output-a от lspci:

Примерен код

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11) 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter

......................................
Искам да отбележа че доста по ръчках Гоогле преди да пиша.
Някой ако има такъв да сподели къде греша или поне да ми дадете някакви насоки.

П.С. В опитите ми дори се принудих да си кача и Windows за да видя дали той ще ги хване но и при него нямах успех.  В системния BIOS няма никакви опции по темата.

ето и dmesg:

Примерен код

Linux version 2.6.17-gentoo-r4 (root@MindSys) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #5 PREEMPT Sun Aug 6 23:25:16 EEST 2006 BIOS-provided physical RAM map:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)  BIOS-e820: 0000000000100000 - 000000001bfd0000 (usable)  BIOS-e820: 000000001bfd0000 - 000000001bfde000 (ACPI data)  BIOS-e820: 000000001bfde000 - 000000001c000000 (ACPI NVS)  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 447MB LOWMEM available. On node 0 totalpages: 114640   DMA zone: 4096 pages, LIFO batch:0   Normal zone: 110544 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f6390 ACPI: RSDT (v001 A M I  OEMRSDT  0x10000512 MSFT 0x00000097) @ 0x1bfd0000 ACPI: FADT (v002 A M I  OEMFACP  0x10000512 MSFT 0x00000097) @ 0x1bfd0200 ACPI: MADT (v001 A M I  OEMAPIC  0x10000512 MSFT 0x00000097) @ 0x1bfd0390 ACPI: BOOT (v001 A M I  OEMBOOT  0x10000512 MSFT 0x00000097) @ 0x1bfd03f0 ACPI: OEMB (v001 A M I  AMI_OEM  0x10000512 MSFT 0x00000097) @ 0x1bfde040 ACPI: DSDT (v001  0AAAA 0AAAA005 0x00000005 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode:  Flat.  Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 1c000000:e3780000) Built 1 zonelists Kernel command line: root=/dev/hdc1 udev resume=/dev/hdc7 pci=assign-busses mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1641.043 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 450004k/458560k available (2834k kernel code, 8068k reserved, 742k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3215.89 BogoMIPS (lpj=1607946) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Celeron(R) M processor         1.60GHz stepping 08 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 10 11 12 14 15) ACPI: Power Resource [GFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report TC classifier action (bugs to [EMAIL=netdev@vger.kernel.org]netdev@vger.kernel.org[/EMAIL] cc [EMAIL=hadi@cyberus.ca]hadi@cyberus.ca[/EMAIL]) PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 PCI: Bridge: 0000:00:01.0   IO window: b000-bfff   MEM window: df600000-df6fffff   PREFETCH window: cd500000-dd4fffff NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x52 set to 0x1 Total HugeTLB memory allocated, 0 SGI XFS with no debug enabled Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered (default) Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected SiS 661 chipset agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 vesafb: Silicon Integrated Systems Corp., 6330, S01301.6B (OEM: SiS) vesafb: VBE version: 3.0 vesafb: protected mode interface info at cbd1:0008 vesafb: pmi: set display start = c00cbd42, set palette = c00cbd86 vesafb: VBIOS/hardware doesn't support DDC transfers vesafb: no monitor limits have been set vesafb: scrolling: redraw vesafb: framebuffer at 0xd0000000, mapped to 0xdc880000, using 6144k, total 16384k fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (63 C) PNP: No PS/2 controller found. Probing ports directly. i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0xa0471b/0x0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 1 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: TSSTcorpCDW/DVD TS-L462C, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HTS424040M9AT00, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 512KiB hdc: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100) hdc: cache flushes supported  hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 > hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL=dm-devel@redhat.com]dm-devel@redhat.com[/EMAIL] TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 15 p4-clockmod: Warning: Pentium M detected. The speedstep_centrino module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible. p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Using IPI Shortcut mode ACPI wakeup devices: PCI0 PS2K PS2M  MAC AC97 MC97 EUSB  USB USB2 USB3 CBS0 S139 SDCR MSCR SLPB ACPI: (supports S0 S1 S3 S4 S5) ReiserFS: hdc1: found reiserfs format "3.6" with standard journal ReiserFS: hdc1: using ordered data mode ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc1: checking transaction log (hdc1) ReiserFS: hdc1: journal-1153: found in header: first_unflushed_offset 2541, last_flushed_trans_id 22324 ReiserFS: hdc1: journal-1206: Starting replay from offset 95885144885741, trans_id 0 ReiserFS: hdc1: journal-1299: Setting newest_mount_id to 73 ReiserFS: hdc1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 196k freed sis900.c: v1.08.09 Sep. 19 2005 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 16, 00:17:31:02:0f:86. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 17, io mem 0xdfffc000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 18, io mem 0xdfffd000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 19 ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.2: irq 19, io mem 0xdfffe000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 20 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:03.3: irq 20, io mem 0xdffff000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 8 ports detected ReiserFS: hdc5: found reiserfs format "3.6" with standard journal ReiserFS: hdc5: warning: CONFIG_REISERFS_CHECK is set ON ReiserFS: hdc5: warning: - it is slow mode for debugging. ReiserFS: hdc5: using ordered data mode ReiserFS: hdc5: journal params: device hdc5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc5: checking transaction log (hdc5) ReiserFS: hdc5: journal-1153: found in header: first_unflushed_offset 1795, last_flushed_trans_id 13906 ReiserFS: hdc5: journal-1206: Starting replay from offset 59730110187267, trans_id 0 ReiserFS: hdc5: journal-1299: Setting newest_mount_id to 65 ReiserFS: hdc5: Using r5 hash to sort names ReiserFS: hdc6: found reiserfs format "3.6" with standard journal ReiserFS: hdc6: warning: CONFIG_REISERFS_CHECK is set ON ReiserFS: hdc6: warning: - it is slow mode for debugging. ReiserFS: hdc6: using ordered data mode ReiserFS: hdc6: journal params: device hdc6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc6: checking transaction log (hdc6) ReiserFS: hdc6: journal-1153: found in header: first_unflushed_offset 4224, last_flushed_trans_id 653 ReiserFS: hdc6: journal-1206: Starting replay from offset 2808908615808, trans_id 0 ReiserFS: hdc6: journal-1299: Setting newest_mount_id to 58 ReiserFS: hdc6: Using r5 hash to sort names Adding 473876k swap on /dev/hdc7.  Priority:-1 extents:1 across:473876k ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 21 intel8x0_measure_ac97_clock: measured 60133 usecs intel8x0: clocking to 48000 Bridge firewalling registered eth0: Media Link On 100mbps full-duplex NET: Registered protocol family 17 cdrom: This disc doesn't have any tracks I recognize!

[d1saster]

lspci изобщо не ги показва, което не значи че ядрото не ги намира. Струва ми се, че изобщо не работят, т.е. проблема е хардуерен. Употребяван ли си купи лаптопа или нов? Как така го взе без ОС?

[Nerf]

з,
точно и аз това си мисля. Реших да пиша във форума за да разбера дали няма някоя тънкост при активирането им (хардуерно). Един приятел има същия (почти същия) и на него си му хваща всичко.
Новичък е на има няма 1 месец. Ще го нося в сервиза тези дни ..... колкото и да не ми се иска '>

[Nerf]

Оказа се хардуерен проблем. В Most_bg го оправиха(непожелаха да кажат как) и сега всичко е ток.